The Bio Double Slatted Bed Base in beech multiplex plywood is finger-jointed at the corners, making it very stable. The sprung slats are also made of beech wood with sliding tension adjusters in the lumbar area to set the slat hardness according to your personal preference.
The Bio Double Row Ergonomic Slatted Frame is made entirely of beech multiplex plywood. The 28 flexible sprung slats in adapt perfectly to the shape of the body and encourage correct posture during sleep. This bed therefore offers relief from back and neck pain.
The sleek design of the Bio single slat base makes it easy to fit it into any bed frame. The finger joints at the corners, which hold the frame together, ensure very high stability.
If you prefer an adjustable slatted base that can be reclined at the head or feet, take a look at the Bio Reclinable Slatted Bed Base.
The main characteristics of the Double Row Slatted Bed Base Bio are:
28 High Quality Beech Sprung Bed Slats that adapt to the shape of the body for a better night's sleep
Single Pocket Polyethylene Slat Holders inserted directly into the side rails to add strength and durability
Sliding stiffness adjusters on 8 slats in the lumbar area. This mechanism provides extra support where the majority of the body's weight is concentrated to ensure that the spine remains straight during sleep. To increase the firmness of these slats, simply move the adjusters further apart until the desired level of support is achieved.
Total Height from the floor to the top of the frame: 6 cm without legs and 30 to 50 cm with legs
Frame height and thickness: 60 x 30 mm
Slats width and thickness: 68 x 8 mm
The product is shipped with the frame assembled and the slats inserted. Only the feet will be screwed in place, if present.
If you think the entrance of your home might be too narrow to bring the bed inside, you can opt for two Single Slatted Bed Bases and join them on-site using special hooks, available in the accessories section of those products.
If you need a bespoke size you can ask us for a quote, specifying the measurements you require.
You can choose between two options for the legs, depending on how you want to use the bed base
No legs: this option is ideal if you need a drop-in slatted base for an existing bed frame with side supports and a central beam running from the head to the foot of the bed. If you do not have a central support in the outer bed frame, we can supply two legs to screw to the centre beam of the slatted base. To request this option please contact us.
With central and side legs: this option is ideal if you wish to use a freestanding bed base. In this case the bed is supplied with 2 central legs and 4 side legs.
The wood is lacquered with a pore sealing finish and can be cleaned with a soft cloth and lukewarm water. If necessary, a mild wood cleaner can be used for more resistant stains.
The slats can easily be replaced if necessary. To obtain replacement slats, you can send us a request using the contact form. To replace the slats, simply pull them out of their slots and insert the new ones.
The Bio Double Slatted Bed Base in beech multiplex plywood is finger-jointed at the corners, making it very stable. The sprung slats are also made of beech wood with sliding tension adjusters in the lumbar area to set the slat hardness according to your personal preference.
Safe Payments
Delivery policy
